Riak S2 error

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

Riak S2 error

Michael Walsh
All,

I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting the following cuttlefish error out of advanced.config. Any suggestions on where I'm going wrong?

notes: erlang error was fixed. All paths are correct. 

Thanks!

-Michael Walsh

$riak config generate -l debug

...
                             {riak_kv,
                              [{add_paths,
                                "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
                               {storage_backend,riak_cs_kv_multi_backend},
                               {multi_backend_prefix_list,
                                [{<<"0b:">>,be_blocks}]},
                               {multi_backend_default,be_default},
                               {multi_backend,
                                [{be_default,riak_kv_eleveldb_backend,
                                  [{total_leveldb_mem_percent,30},
                                   {data_root,"/var/lib/riak/leveldb"}]},
                                 {be_blocks,riak_kv_bitcask_backend,
                                  [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
  in function  cuttlefish_escript:engage_cuttlefish/1 (src/cuttlefish_escript.erl, line 375)
  in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl, line 258)
  in call from escript:run/2 (escript.erl, line 747)
  in call from escript:start/1 (escript.erl, line 277)
  in call from init:start_it/1
  in call from init:start_em/1

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|

Re: Riak S2 error

Shunichi Shinohara
Hi Michael,

Could you provide all the result of "riak config generate -l debug" as well as
riak.conf and advanced.config?

Thanks,
Shino

2016-01-07 9:05 GMT+09:00 Michael Walsh <[hidden email]>:

> All,
>
> I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting
> the following cuttlefish error out of advanced.config. Any suggestions on
> where I'm going wrong?
>
> notes: erlang error was fixed. All paths are correct.
>
> Thanks!
>
> -Michael Walsh
>
> $riak config generate -l debug
>
> ...
>                              {riak_kv,
>                               [{add_paths,
>
> "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>                                {storage_backend,riak_cs_kv_multi_backend},
>                                {multi_backend_prefix_list,
>                                 [{<<"0b:">>,be_blocks}]},
>                                {multi_backend_default,be_default},
>                                {multi_backend,
>                                 [{be_default,riak_kv_eleveldb_backend,
>                                   [{total_leveldb_mem_percent,30},
>                                    {data_root,"/var/lib/riak/leveldb"}]},
>                                  {be_blocks,riak_kv_bitcask_backend,
>
> [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>   in function  cuttlefish_escript:engage_cuttlefish/1
> (src/cuttlefish_escript.erl, line 375)
>   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> line 258)
>   in call from escript:run/2 (escript.erl, line 747)
>   in call from escript:start/1 (escript.erl, line 277)
>   in call from init:start_it/1
>   in call from init:start_em/1
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|

Re: Riak S2 error

Michael Walsh
Sure thing.

And thanks!


advanced.config:
{riak_kv, [
    {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {total_leveldb_mem_percent, 30},
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]}
]}.

On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara <[hidden email]> wrote:
Hi Michael,

Could you provide all the result of "riak config generate -l debug" as well as
riak.conf and advanced.config?

Thanks,
Shino

2016-01-07 9:05 GMT+09:00 Michael Walsh <[hidden email]>:
> All,
>
> I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting
> the following cuttlefish error out of advanced.config. Any suggestions on
> where I'm going wrong?
>
> notes: erlang error was fixed. All paths are correct.
>
> Thanks!
>
> -Michael Walsh
>
> $riak config generate -l debug
>
> ...
>                              {riak_kv,
>                               [{add_paths,
>
> "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>                                {storage_backend,riak_cs_kv_multi_backend},
>                                {multi_backend_prefix_list,
>                                 [{<<"0b:">>,be_blocks}]},
>                                {multi_backend_default,be_default},
>                                {multi_backend,
>                                 [{be_default,riak_kv_eleveldb_backend,
>                                   [{total_leveldb_mem_percent,30},
>                                    {data_root,"/var/lib/riak/leveldb"}]},
>                                  {be_blocks,riak_kv_bitcask_backend,
>
> [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>   in function  cuttlefish_escript:engage_cuttlefish/1
> (src/cuttlefish_escript.erl, line 375)
>   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> line 258)
>   in call from escript:run/2 (escript.erl, line 747)
>   in call from escript:start/1 (escript.erl, line 277)
>   in call from init:start_it/1
>   in call from init:start_em/1
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>


_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

riak.conf (17K) Download Attachment
riak_config_gen (21K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: Riak S2 error

Charlie Voiselle
Michael:

If that is the entire contents of your advanced.config file, you will need to wrap all of that in an erlang list delimiter. [].  For example

[
{riak_kv, [
    {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {total_leveldb_mem_percent, 30},
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]}
]}
].


Give that a shot and let us know if it works for you!

Thanks,
Charlie Voiselle

On Jan 7, 2016, at 11:53 AM, Michael Walsh <[hidden email]> wrote:

Sure thing.

And thanks!


advanced.config:
{riak_kv, [
    {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {total_leveldb_mem_percent, 30},
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]}
]}.

On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara <[hidden email]> wrote:
Hi Michael,

Could you provide all the result of "riak config generate -l debug" as well as
riak.conf and advanced.config?

Thanks,
Shino

2016-01-07 9:05 GMT+09:00 Michael Walsh <[hidden email]>:

> All,
>
> I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting
> the following cuttlefish error out of advanced.config. Any suggestions on
> where I'm going wrong?
>
> notes: erlang error was fixed. All paths are correct.
>
> Thanks!
>
> -Michael Walsh
>
> $riak config generate -l debug
>
> ...
>                              {riak_kv,
>                               [{add_paths,
>
> "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>                                {storage_backend,riak_cs_kv_multi_backend},
>                                {multi_backend_prefix_list,
>                                 [{<<"0b:">>,be_blocks}]},
>                                {multi_backend_default,be_default},
>                                {multi_backend,
>                                 [{be_default,riak_kv_eleveldb_backend,
>                                   [{total_leveldb_mem_percent,30},
>                                    {data_root,"/var/lib/riak/leveldb"}]},
>                                  {be_blocks,riak_kv_bitcask_backend,
>
> [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>   in function  cuttlefish_escript:engage_cuttlefish/1
> (src/cuttlefish_escript.erl, line 375)
>   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> line 258)
>   in call from escript:run/2 (escript.erl, line 747)
>   in call from escript:start/1 (escript.erl, line 277)
>   in call from init:start_it/1
>   in call from init:start_em/1
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

<riak.conf><riak_config_gen>_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com


_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|

Re: Riak S2 error

Michael Walsh
That definitely fixed the configuration problem, but now its tossing a riak_cs_kv_multi_backend is non-loadable. So I'll dig into riak_cs some more to try to see what could be wrong there, although it is not reporting any errors while running.

On Thu, Jan 7, 2016 at 3:12 PM, Charlie Voiselle <[hidden email]> wrote:
Michael:

If that is the entire contents of your advanced.config file, you will need to wrap all of that in an erlang list delimiter. [].  For example

[
{riak_kv, [
    {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {total_leveldb_mem_percent, 30},
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]}
]}
].


Give that a shot and let us know if it works for you!

Thanks,
Charlie Voiselle

On Jan 7, 2016, at 11:53 AM, Michael Walsh <[hidden email]> wrote:

Sure thing.

And thanks!


advanced.config:
{riak_kv, [
    {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
    {storage_backend, riak_cs_kv_multi_backend},
    {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
    {multi_backend_default, be_default},
    {multi_backend, [
        {be_default, riak_kv_eleveldb_backend, [
            {total_leveldb_mem_percent, 30},
            {data_root, "/var/lib/riak/leveldb"}
        ]},
        {be_blocks, riak_kv_bitcask_backend, [
            {data_root, "/var/lib/riak/bitcask"}
        ]}
    ]}
]}.

On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara <[hidden email]> wrote:
Hi Michael,

Could you provide all the result of "riak config generate -l debug" as well as
riak.conf and advanced.config?

Thanks,
Shino

2016-01-07 9:05 GMT+09:00 Michael Walsh <[hidden email]>:

> All,
>
> I'm trying to set up a RIak S2 instance to integrate with KV and I'm getting
> the following cuttlefish error out of advanced.config. Any suggestions on
> where I'm going wrong?
>
> notes: erlang error was fixed. All paths are correct.
>
> Thanks!
>
> -Michael Walsh
>
> $riak config generate -l debug
>
> ...
>                              {riak_kv,
>                               [{add_paths,
>
> "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>                                {storage_backend,riak_cs_kv_multi_backend},
>                                {multi_backend_prefix_list,
>                                 [{<<"0b:">>,be_blocks}]},
>                                {multi_backend_default,be_default},
>                                {multi_backend,
>                                 [{be_default,riak_kv_eleveldb_backend,
>                                   [{total_leveldb_mem_percent,30},
>                                    {data_root,"/var/lib/riak/leveldb"}]},
>                                  {be_blocks,riak_kv_bitcask_backend,
>
> [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>   in function  cuttlefish_escript:engage_cuttlefish/1
> (src/cuttlefish_escript.erl, line 375)
>   in call from cuttlefish_escript:generate/1 (src/cuttlefish_escript.erl,
> line 258)
>   in call from escript:run/2 (escript.erl, line 747)
>   in call from escript:start/1 (escript.erl, line 277)
>   in call from init:start_it/1
>   in call from init:start_em/1
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

<riak.conf><riak_config_gen>_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com



_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|

Re: Riak S2 error

Luke Bakken
Hi Michael,

Please ensure that /usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin actually
is the correct path to the *.beam files. This is a
distribution-dependent path, and may be
/usr/lib/riak-cs/lib/riak_cs-2.1.0/ebin

--
Luke Bakken
Engineer
[hidden email]

On Fri, Jan 8, 2016 at 8:52 AM, Michael Walsh <[hidden email]> wrote:

> That definitely fixed the configuration problem, but now its tossing a
> riak_cs_kv_multi_backend is non-loadable. So I'll dig into riak_cs some more
> to try to see what could be wrong there, although it is not reporting any
> errors while running.
>
> On Thu, Jan 7, 2016 at 3:12 PM, Charlie Voiselle <[hidden email]>
> wrote:
>>
>> Michael:
>>
>> If that is the entire contents of your advanced.config file, you will need
>> to wrap all of that in an erlang list delimiter. [].  For example
>>
>> [
>> {riak_kv, [
>>     {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>     {storage_backend, riak_cs_kv_multi_backend},
>>     {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
>>     {multi_backend_default, be_default},
>>     {multi_backend, [
>>         {be_default, riak_kv_eleveldb_backend, [
>>             {total_leveldb_mem_percent, 30},
>>             {data_root, "/var/lib/riak/leveldb"}
>>         ]},
>>         {be_blocks, riak_kv_bitcask_backend, [
>>             {data_root, "/var/lib/riak/bitcask"}
>>         ]}
>>     ]}
>> ]}
>> ].
>>
>>
>> Give that a shot and let us know if it works for you!
>>
>> Thanks,
>> Charlie Voiselle
>>
>> On Jan 7, 2016, at 11:53 AM, Michael Walsh <[hidden email]> wrote:
>>
>> Sure thing.
>>
>> And thanks!
>>
>>
>> advanced.config:
>> {riak_kv, [
>>     {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>     {storage_backend, riak_cs_kv_multi_backend},
>>     {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
>>     {multi_backend_default, be_default},
>>     {multi_backend, [
>>         {be_default, riak_kv_eleveldb_backend, [
>>             {total_leveldb_mem_percent, 30},
>>             {data_root, "/var/lib/riak/leveldb"}
>>         ]},
>>         {be_blocks, riak_kv_bitcask_backend, [
>>             {data_root, "/var/lib/riak/bitcask"}
>>         ]}
>>     ]}
>> ]}.
>>
>> On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara <[hidden email]>
>> wrote:
>>>
>>> Hi Michael,
>>>
>>> Could you provide all the result of "riak config generate -l debug" as
>>> well as
>>> riak.conf and advanced.config?
>>>
>>> Thanks,
>>> Shino
>>>
>>> 2016-01-07 9:05 GMT+09:00 Michael Walsh <[hidden email]>:
>>> > All,
>>> >
>>> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm
>>> > getting
>>> > the following cuttlefish error out of advanced.config. Any suggestions
>>> > on
>>> > where I'm going wrong?
>>> >
>>> > notes: erlang error was fixed. All paths are correct.
>>> >
>>> > Thanks!
>>> >
>>> > -Michael Walsh
>>> >
>>> > $riak config generate -l debug
>>> >
>>> > ...
>>> >                              {riak_kv,
>>> >                               [{add_paths,
>>> >
>>> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>> >
>>> > {storage_backend,riak_cs_kv_multi_backend},
>>> >                                {multi_backend_prefix_list,
>>> >                                 [{<<"0b:">>,be_blocks}]},
>>> >                                {multi_backend_default,be_default},
>>> >                                {multi_backend,
>>> >                                 [{be_default,riak_kv_eleveldb_backend,
>>> >                                   [{total_leveldb_mem_percent,30},
>>> >
>>> > {data_root,"/var/lib/riak/leveldb"}]},
>>> >                                  {be_blocks,riak_kv_bitcask_backend,
>>> >
>>> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>>> >   in function  cuttlefish_escript:engage_cuttlefish/1
>>> > (src/cuttlefish_escript.erl, line 375)
>>> >   in call from cuttlefish_escript:generate/1
>>> > (src/cuttlefish_escript.erl,
>>> > line 258)
>>> >   in call from escript:run/2 (escript.erl, line 747)
>>> >   in call from escript:start/1 (escript.erl, line 277)
>>> >   in call from init:start_it/1
>>> >   in call from init:start_em/1
>>> >
>>> > _______________________________________________
>>> > riak-users mailing list
>>> > [hidden email]
>>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>> >
>>
>>
>>
>> <riak.conf><riak_config_gen>_______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>
>>
>
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|

Re: Riak S2 error

Michael Walsh
That was the first thing I checked. Good thought though.

On Fri, Jan 8, 2016 at 9:07 AM, Luke Bakken <[hidden email]> wrote:
Hi Michael,

Please ensure that /usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin actually
is the correct path to the *.beam files. This is a
distribution-dependent path, and may be
/usr/lib/riak-cs/lib/riak_cs-2.1.0/ebin

--
Luke Bakken
Engineer
[hidden email]

On Fri, Jan 8, 2016 at 8:52 AM, Michael Walsh <[hidden email]> wrote:
> That definitely fixed the configuration problem, but now its tossing a
> riak_cs_kv_multi_backend is non-loadable. So I'll dig into riak_cs some more
> to try to see what could be wrong there, although it is not reporting any
> errors while running.
>
> On Thu, Jan 7, 2016 at 3:12 PM, Charlie Voiselle <[hidden email]>
> wrote:
>>
>> Michael:
>>
>> If that is the entire contents of your advanced.config file, you will need
>> to wrap all of that in an erlang list delimiter. [].  For example
>>
>> [
>> {riak_kv, [
>>     {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>     {storage_backend, riak_cs_kv_multi_backend},
>>     {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
>>     {multi_backend_default, be_default},
>>     {multi_backend, [
>>         {be_default, riak_kv_eleveldb_backend, [
>>             {total_leveldb_mem_percent, 30},
>>             {data_root, "/var/lib/riak/leveldb"}
>>         ]},
>>         {be_blocks, riak_kv_bitcask_backend, [
>>             {data_root, "/var/lib/riak/bitcask"}
>>         ]}
>>     ]}
>> ]}
>> ].
>>
>>
>> Give that a shot and let us know if it works for you!
>>
>> Thanks,
>> Charlie Voiselle
>>
>> On Jan 7, 2016, at 11:53 AM, Michael Walsh <[hidden email]> wrote:
>>
>> Sure thing.
>>
>> And thanks!
>>
>>
>> advanced.config:
>> {riak_kv, [
>>     {add_paths, "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>     {storage_backend, riak_cs_kv_multi_backend},
>>     {multi_backend_prefix_list, [{<<"0b:">>, be_blocks}]},
>>     {multi_backend_default, be_default},
>>     {multi_backend, [
>>         {be_default, riak_kv_eleveldb_backend, [
>>             {total_leveldb_mem_percent, 30},
>>             {data_root, "/var/lib/riak/leveldb"}
>>         ]},
>>         {be_blocks, riak_kv_bitcask_backend, [
>>             {data_root, "/var/lib/riak/bitcask"}
>>         ]}
>>     ]}
>> ]}.
>>
>> On Wed, Jan 6, 2016 at 5:44 PM, Shunichi Shinohara <[hidden email]>
>> wrote:
>>>
>>> Hi Michael,
>>>
>>> Could you provide all the result of "riak config generate -l debug" as
>>> well as
>>> riak.conf and advanced.config?
>>>
>>> Thanks,
>>> Shino
>>>
>>> 2016-01-07 9:05 GMT+09:00 Michael Walsh <[hidden email]>:
>>> > All,
>>> >
>>> > I'm trying to set up a RIak S2 instance to integrate with KV and I'm
>>> > getting
>>> > the following cuttlefish error out of advanced.config. Any suggestions
>>> > on
>>> > where I'm going wrong?
>>> >
>>> > notes: erlang error was fixed. All paths are correct.
>>> >
>>> > Thanks!
>>> >
>>> > -Michael Walsh
>>> >
>>> > $riak config generate -l debug
>>> >
>>> > ...
>>> >                              {riak_kv,
>>> >                               [{add_paths,
>>> >
>>> > "/usr/lib64/riak-cs/lib/riak_cs-2.1.0/ebin"},
>>> >
>>> > {storage_backend,riak_cs_kv_multi_backend},
>>> >                                {multi_backend_prefix_list,
>>> >                                 [{<<"0b:">>,be_blocks}]},
>>> >                                {multi_backend_default,be_default},
>>> >                                {multi_backend,
>>> >                                 [{be_default,riak_kv_eleveldb_backend,
>>> >                                   [{total_leveldb_mem_percent,30},
>>> >
>>> > {data_root,"/var/lib/riak/leveldb"}]},
>>> >                                  {be_blocks,riak_kv_bitcask_backend,
>>> >
>>> > [{data_root,"/var/lib/riak/bitcask"}]}]}]}) (lists.erl, line 1247)
>>> >   in function  cuttlefish_escript:engage_cuttlefish/1
>>> > (src/cuttlefish_escript.erl, line 375)
>>> >   in call from cuttlefish_escript:generate/1
>>> > (src/cuttlefish_escript.erl,
>>> > line 258)
>>> >   in call from escript:run/2 (escript.erl, line 747)
>>> >   in call from escript:start/1 (escript.erl, line 277)
>>> >   in call from init:start_it/1
>>> >   in call from init:start_em/1
>>> >
>>> > _______________________________________________
>>> > riak-users mailing list
>>> > [hidden email]
>>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>> >
>>
>>
>>
>> <riak.conf><riak_config_gen>_______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>
>>
>
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>


_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com