Bug: Stanchion 1.5 in repo along riak cs 2.0

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Bug: Stanchion 1.5 in repo along riak cs 2.0

Toby Corkindale-2
Hi,
I think this is a bug?

Riak CS 2.0.1 recommends Stanchion 2.0.0 to be installed.

However if you follow the instructions to add the Riak CS repo, you get Riak CS 2.0.1, and Stanchion 1.5.0.

Toby

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Kota Uenishi
Toby, thank you for reporting. However, I could not figure out which
part of the doc is wrong and leading to Stanchion 1.5. Could you
elaborate more details?

Technically, it is correct to use Stanchion 2.0 with Riak CS 2.0.1.
And more, difference between Stanchion 2.0 and 1.5 is very small, it's
just about configuration file format, and several items.

On Thu, Jun 4, 2015 at 1:45 PM, Toby Corkindale <[hidden email]> wrote:

> Hi,
> I think this is a bug?
>
> Riak CS 2.0.1 recommends Stanchion 2.0.0 to be installed.
>
> However if you follow the instructions to add the Riak CS repo, you get Riak
> CS 2.0.1, and Stanchion 1.5.0.
>
> Toby
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>



--
Kota UENISHI / @kuenishi
Basho Japan KK

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Toby Corkindale-2
Hi Kota,
I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this by following the instructions to add the packagecloud.io Apt repository.
However that repository contains stanchion 1.5 rather than 2.0. (It does, however, contain Riak CS 2.0.1)

Cheers
Toby


On Fri, 5 Jun 2015 at 13:02 Kota Uenishi <[hidden email]> wrote:
Toby, thank you for reporting. However, I could not figure out which
part of the doc is wrong and leading to Stanchion 1.5. Could you
elaborate more details?

Technically, it is correct to use Stanchion 2.0 with Riak CS 2.0.1.
And more, difference between Stanchion 2.0 and 1.5 is very small, it's
just about configuration file format, and several items.

On Thu, Jun 4, 2015 at 1:45 PM, Toby Corkindale <[hidden email]> wrote:
> Hi,
> I think this is a bug?
>
> Riak CS 2.0.1 recommends Stanchion 2.0.0 to be installed.
>
> However if you follow the instructions to add the Riak CS repo, you get Riak
> CS 2.0.1, and Stanchion 1.5.0.
>
> Toby
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>



--
Kota UENISHI / @kuenishi
Basho Japan KK

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Matthew Brender
For others not finding it, the instructions show up here:
https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb


Matt Brender | Developer Advocacy Lead
Basho Technologies
t: @mjbrender


On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:

> Hi Kota,
> I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this by
> following the instructions to add the packagecloud.io Apt repository.
> However that repository contains stanchion 1.5 rather than 2.0. (It does,
> however, contain Riak CS 2.0.1)
>
> Cheers
> Toby
>
>
> On Fri, 5 Jun 2015 at 13:02 Kota Uenishi <[hidden email]> wrote:
>>
>> Toby, thank you for reporting. However, I could not figure out which
>> part of the doc is wrong and leading to Stanchion 1.5. Could you
>> elaborate more details?
>>
>> Technically, it is correct to use Stanchion 2.0 with Riak CS 2.0.1.
>> And more, difference between Stanchion 2.0 and 1.5 is very small, it's
>> just about configuration file format, and several items.
>>
>> On Thu, Jun 4, 2015 at 1:45 PM, Toby Corkindale <[hidden email]> wrote:
>> > Hi,
>> > I think this is a bug?
>> >
>> > Riak CS 2.0.1 recommends Stanchion 2.0.0 to be installed.
>> >
>> > However if you follow the instructions to add the Riak CS repo, you get
>> > Riak
>> > CS 2.0.1, and Stanchion 1.5.0.
>> >
>> > Toby
>> >
>> > _______________________________________________
>> > riak-users mailing list
>> > [hidden email]
>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>> >
>>
>>
>>
>> --
>> Kota UENISHI / @kuenishi
>> Basho Japan KK
>>
>> _______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Kota Uenishi
Toby,

I tried to reproduce your problem in my clean ubuntu 14.04 which is a fresh docker image, but failed. No recommendation was made. Maybe state of your apt repository or something is stale?

# apt-get install riak-cs=2.0.1-1

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following NEW packages will be installed:

  riak-cs

0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.

Need to get 20.1 MB of archives.

After this operation, 36.8 MB of additional disk space will be used.

Fetched 20.1 MB in 6s (3322 kB/s)

Selecting previously unselected package riak-cs.

(Reading database ... 12002 files and directories currently installed.)

Preparing to unpack .../riak-cs_2.0.1-1_amd64.deb ...

Unpacking riak-cs (2.0.1-1) ...

Processing triggers for ureadahead (0.100.0-16) ...

Setting up riak-cs (2.0.1-1) ...

Adding group `riak' (GID 105) ...

Done.

Adding system user `riakcs' (UID 102) ...

Adding new user `riakcs' (UID 102) with group `riak' ...

Not creating home directory `/var/lib/riak-cs'.

Processing triggers for ureadahead (0.100.0-16) ...

# apt-get install stanchion=2.0.0-1

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following NEW packages will be installed:

  stanchion

0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.

Need to get 18.4 MB of archives.

After this operation, 34.0 MB of additional disk space will be used.

Fetched 18.4 MB in 5s (3163 kB/s)

Selecting previously unselected package stanchion.

(Reading database ... 13780 files and directories currently installed.)

Preparing to unpack .../stanchion_2.0.0-1_amd64.deb ...

Unpacking stanchion (2.0.0-1) ...

Processing triggers for ureadahead (0.100.0-16) ...

Setting up stanchion (2.0.0-1) ...

Adding system user `stanchion' (UID 103) ...

Adding new user `stanchion' (UID 103) with group `riak' ...

Not creating home directory `/var/lib/stanchion'.

Processing triggers for ureadahead (0.100.0-16) ...



On Fri, Jun 5, 2015 at 11:40 PM, Matthew Brender <[hidden email]> wrote:
For others not finding it, the instructions show up here:
https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb


Matt Brender | Developer Advocacy Lead
Basho Technologies
t: @mjbrender


On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:
> Hi Kota,
> I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this by
> following the instructions to add the packagecloud.io Apt repository.
> However that repository contains stanchion 1.5 rather than 2.0. (It does,
> however, contain Riak CS 2.0.1)
>
> Cheers
> Toby
>
>
> On Fri, 5 Jun 2015 at 13:02 Kota Uenishi <[hidden email]> wrote:
>>
>> Toby, thank you for reporting. However, I could not figure out which
>> part of the doc is wrong and leading to Stanchion 1.5. Could you
>> elaborate more details?
>>
>> Technically, it is correct to use Stanchion 2.0 with Riak CS 2.0.1.
>> And more, difference between Stanchion 2.0 and 1.5 is very small, it's
>> just about configuration file format, and several items.
>>
>> On Thu, Jun 4, 2015 at 1:45 PM, Toby Corkindale <[hidden email]> wrote:
>> > Hi,
>> > I think this is a bug?
>> >
>> > Riak CS 2.0.1 recommends Stanchion 2.0.0 to be installed.
>> >
>> > However if you follow the instructions to add the Riak CS repo, you get
>> > Riak
>> > CS 2.0.1, and Stanchion 1.5.0.
>> >
>> > Toby
>> >
>> > _______________________________________________
>> > riak-users mailing list
>> > [hidden email]
>> > http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>> >
>>
>>
>>
>> --
>> Kota UENISHI / @kuenishi
>> Basho Japan KK
>>
>> _______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>
>
> _______________________________________________
> riak-users mailing list
> [hidden email]
> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>



--
Kota UENISHI / @kuenishi
Basho Japan KK

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Toby Corkindale-2
Hi Kota,
I was installing these on fresh 14.04 VMs, so I don't know how I could have had stale apt-cache info re Stanchion, but still had up to date riak-cs package info.
Oh well, if you couldn't reproduce it, never mind. Thanks for trying.

Cheers
Toby

On Mon, 8 Jun 2015 at 11:54 Kota Uenishi <[hidden email]> wrote:
Toby,

I tried to reproduce your problem in my clean ubuntu 14.04 which is a fresh docker image, but failed. No recommendation was made. Maybe state of your apt repository or something is stale?

# apt-get install riak-cs=2.0.1-1

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following NEW packages will be installed:

  riak-cs

0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.

Need to get 20.1 MB of archives.

After this operation, 36.8 MB of additional disk space will be used.

Fetched 20.1 MB in 6s (3322 kB/s)

Selecting previously unselected package riak-cs.

(Reading database ... 12002 files and directories currently installed.)

Preparing to unpack .../riak-cs_2.0.1-1_amd64.deb ...

Unpacking riak-cs (2.0.1-1) ...

Processing triggers for ureadahead (0.100.0-16) ...

Setting up riak-cs (2.0.1-1) ...

Adding group `riak' (GID 105) ...

Done.

Adding system user `riakcs' (UID 102) ...

Adding new user `riakcs' (UID 102) with group `riak' ...

Not creating home directory `/var/lib/riak-cs'.

Processing triggers for ureadahead (0.100.0-16) ...

# apt-get install stanchion=2.0.0-1

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following NEW packages will be installed:

  stanchion

0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.

Need to get 18.4 MB of archives.

After this operation, 34.0 MB of additional disk space will be used.

Fetched 18.4 MB in 5s (3163 kB/s)

Selecting previously unselected package stanchion.

(Reading database ... 13780 files and directories currently installed.)

Preparing to unpack .../stanchion_2.0.0-1_amd64.deb ...

Unpacking stanchion (2.0.0-1) ...

Processing triggers for ureadahead (0.100.0-16) ...

Setting up stanchion (2.0.0-1) ...

Adding system user `stanchion' (UID 103) ...

Adding new user `stanchion' (UID 103) with group `riak' ...

Not creating home directory `/var/lib/stanchion'.

Processing triggers for ureadahead (0.100.0-16) ...



On Fri, Jun 5, 2015 at 11:40 PM, Matthew Brender <[hidden email]> wrote:
For others not finding it, the instructions show up here:
https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb


Matt Brender | Developer Advocacy Lead
Basho Technologies
t: @mjbrender


On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:
> Hi Kota,
> I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this by
> following the instructions to add the packagecloud.io Apt repository.
> However that repository contains stanchion 1.5 rather than 2.0. (It does,
> however, contain Riak CS 2.0.1)
>

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Christopher Mancini
Kota,

I think Toby is right, if you look at packagecloud.io, there is no reference to stanchion 2, only 1.5.

https://packagecloud.io/basho/riak-cs?filter=debs

Not sure who can fix this, but its certainly not aligned with our recommendations.


On Mon, Jun 8, 2015 at 9:04 PM, Toby Corkindale <[hidden email]> wrote:
Hi Kota,
I was installing these on fresh 14.04 VMs, so I don't know how I could have had stale apt-cache info re Stanchion, but still had up to date riak-cs package info.
Oh well, if you couldn't reproduce it, never mind. Thanks for trying.

Cheers
Toby

On Mon, 8 Jun 2015 at 11:54 Kota Uenishi <[hidden email]> wrote:
Toby,

I tried to reproduce your problem in my clean ubuntu 14.04 which is a fresh docker image, but failed. No recommendation was made. Maybe state of your apt repository or something is stale?

# apt-get install riak-cs=2.0.1-1

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following NEW packages will be installed:

  riak-cs

0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.

Need to get 20.1 MB of archives.

After this operation, 36.8 MB of additional disk space will be used.

Fetched 20.1 MB in 6s (3322 kB/s)

Selecting previously unselected package riak-cs.

(Reading database ... 12002 files and directories currently installed.)

Preparing to unpack .../riak-cs_2.0.1-1_amd64.deb ...

Unpacking riak-cs (2.0.1-1) ...

Processing triggers for ureadahead (0.100.0-16) ...

Setting up riak-cs (2.0.1-1) ...

Adding group `riak' (GID 105) ...

Done.

Adding system user `riakcs' (UID 102) ...

Adding new user `riakcs' (UID 102) with group `riak' ...

Not creating home directory `/var/lib/riak-cs'.

Processing triggers for ureadahead (0.100.0-16) ...

# apt-get install stanchion=2.0.0-1

Reading package lists... Done

Building dependency tree       

Reading state information... Done

The following NEW packages will be installed:

  stanchion

0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.

Need to get 18.4 MB of archives.

After this operation, 34.0 MB of additional disk space will be used.

Fetched 18.4 MB in 5s (3163 kB/s)

Selecting previously unselected package stanchion.

(Reading database ... 13780 files and directories currently installed.)

Preparing to unpack .../stanchion_2.0.0-1_amd64.deb ...

Unpacking stanchion (2.0.0-1) ...

Processing triggers for ureadahead (0.100.0-16) ...

Setting up stanchion (2.0.0-1) ...

Adding system user `stanchion' (UID 103) ...

Adding new user `stanchion' (UID 103) with group `riak' ...

Not creating home directory `/var/lib/stanchion'.

Processing triggers for ureadahead (0.100.0-16) ...



On Fri, Jun 5, 2015 at 11:40 PM, Matthew Brender <[hidden email]> wrote:
For others not finding it, the instructions show up here:
https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb


Matt Brender | Developer Advocacy Lead
Basho Technologies
t: @mjbrender


On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:
> Hi Kota,
> I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this by
> following the instructions to add the packagecloud.io Apt repository.
> However that repository contains stanchion 1.5 rather than 2.0. (It does,
> however, contain Riak CS 2.0.1)
>

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com




--
Sincerely,

Christopher Mancini
-----------------------------

employee = {
    purpose: solve problems with code,
    phone:    7164625591,
    email:     [hidden email],
}

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Kota Uenishi
I got it! Good catch, Chris.

Toby, you should follow these instructions to get the latest Stanchion:

https://packagecloud.io/basho/stanchion/install

as it looks like we have different repository since 2.0. I did follow
these instructions prior to try my test earlier in this loop.

For Riak CS package, this instructions might be more precise because
it's automatically generated:

https://packagecloud.io/basho/riak-cs/install

On Tue, Jun 9, 2015 at 11:02 PM, Christopher Mancini <[hidden email]> wrote:

> Kota,
>
> I think Toby is right, if you look at packagecloud.io, there is no reference
> to stanchion 2, only 1.5.
>
> https://packagecloud.io/basho/riak-cs?filter=debs
>
> Not sure who can fix this, but its certainly not aligned with our
> recommendations.
>
>
> On Mon, Jun 8, 2015 at 9:04 PM, Toby Corkindale <[hidden email]> wrote:
>>
>> Hi Kota,
>> I was installing these on fresh 14.04 VMs, so I don't know how I could
>> have had stale apt-cache info re Stanchion, but still had up to date riak-cs
>> package info.
>> Oh well, if you couldn't reproduce it, never mind. Thanks for trying.
>>
>> Cheers
>> Toby
>>
>> On Mon, 8 Jun 2015 at 11:54 Kota Uenishi <[hidden email]> wrote:
>>>
>>> Toby,
>>>
>>> I tried to reproduce your problem in my clean ubuntu 14.04 which is a
>>> fresh docker image, but failed. No recommendation was made. Maybe state of
>>> your apt repository or something is stale?
>>>
>>> # apt-get install riak-cs=2.0.1-1
>>>
>>> Reading package lists... Done
>>>
>>> Building dependency tree
>>>
>>> Reading state information... Done
>>>
>>> The following NEW packages will be installed:
>>>
>>>   riak-cs
>>>
>>> 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.
>>>
>>> Need to get 20.1 MB of archives.
>>>
>>> After this operation, 36.8 MB of additional disk space will be used.
>>>
>>> Fetched 20.1 MB in 6s (3322 kB/s)
>>>
>>> Selecting previously unselected package riak-cs.
>>>
>>> (Reading database ... 12002 files and directories currently installed.)
>>>
>>> Preparing to unpack .../riak-cs_2.0.1-1_amd64.deb ...
>>>
>>> Unpacking riak-cs (2.0.1-1) ...
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> Setting up riak-cs (2.0.1-1) ...
>>>
>>> Adding group `riak' (GID 105) ...
>>>
>>> Done.
>>>
>>> Adding system user `riakcs' (UID 102) ...
>>>
>>> Adding new user `riakcs' (UID 102) with group `riak' ...
>>>
>>> Not creating home directory `/var/lib/riak-cs'.
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> # apt-get install stanchion=2.0.0-1
>>>
>>> Reading package lists... Done
>>>
>>> Building dependency tree
>>>
>>> Reading state information... Done
>>>
>>> The following NEW packages will be installed:
>>>
>>>   stanchion
>>>
>>> 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.
>>>
>>> Need to get 18.4 MB of archives.
>>>
>>> After this operation, 34.0 MB of additional disk space will be used.
>>>
>>> Fetched 18.4 MB in 5s (3163 kB/s)
>>>
>>> Selecting previously unselected package stanchion.
>>>
>>> (Reading database ... 13780 files and directories currently installed.)
>>>
>>> Preparing to unpack .../stanchion_2.0.0-1_amd64.deb ...
>>>
>>> Unpacking stanchion (2.0.0-1) ...
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> Setting up stanchion (2.0.0-1) ...
>>>
>>> Adding system user `stanchion' (UID 103) ...
>>>
>>> Adding new user `stanchion' (UID 103) with group `riak' ...
>>>
>>> Not creating home directory `/var/lib/stanchion'.
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> #
>>>
>>>
>>>
>>> On Fri, Jun 5, 2015 at 11:40 PM, Matthew Brender <[hidden email]>
>>> wrote:
>>>>
>>>> For others not finding it, the instructions show up here:
>>>>
>>>> https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb
>>>>
>>>>
>>>> Matt Brender | Developer Advocacy Lead
>>>> Basho Technologies
>>>> t: @mjbrender
>>>>
>>>>
>>>> On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:
>>>> > Hi Kota,
>>>> > I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this
>>>> > by
>>>> > following the instructions to add the packagecloud.io Apt repository.
>>>> > However that repository contains stanchion 1.5 rather than 2.0. (It
>>>> > does,
>>>> > however, contain Riak CS 2.0.1)
>>>> >
>>
>>
>> _______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>
>
>
>
> --
> Sincerely,
>
> Christopher Mancini
> -----------------------------
>
> employee = {
>     purpose: solve problems with code,
>     phone:    7164625591,
>     email:     [hidden email],
>     github:    http://www.github.com/christophermancini
> }



--
Kota UENISHI / @kuenishi
Basho Japan KK

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Toby Corkindale-2
Glad we got to the bottom of it.
You should probably look at updating your docs for Riak-CS and removing stanchion 1.5 from the repo to avoid future confusion?

On Wed, 10 Jun 2015 at 00:46 Kota Uenishi <[hidden email]> wrote:
I got it! Good catch, Chris.

Toby, you should follow these instructions to get the latest Stanchion:

https://packagecloud.io/basho/stanchion/install

as it looks like we have different repository since 2.0. I did follow
these instructions prior to try my test earlier in this loop.

For Riak CS package, this instructions might be more precise because
it's automatically generated:

https://packagecloud.io/basho/riak-cs/install

On Tue, Jun 9, 2015 at 11:02 PM, Christopher Mancini <[hidden email]> wrote:
> Kota,
>
> I think Toby is right, if you look at packagecloud.io, there is no reference
> to stanchion 2, only 1.5.
>
> https://packagecloud.io/basho/riak-cs?filter=debs
>
> Not sure who can fix this, but its certainly not aligned with our
> recommendations.
>
>
> On Mon, Jun 8, 2015 at 9:04 PM, Toby Corkindale <[hidden email]> wrote:
>>
>> Hi Kota,
>> I was installing these on fresh 14.04 VMs, so I don't know how I could
>> have had stale apt-cache info re Stanchion, but still had up to date riak-cs
>> package info.
>> Oh well, if you couldn't reproduce it, never mind. Thanks for trying.
>>
>> Cheers
>> Toby
>>
>> On Mon, 8 Jun 2015 at 11:54 Kota Uenishi <[hidden email]> wrote:
>>>
>>> Toby,
>>>
>>> I tried to reproduce your problem in my clean ubuntu 14.04 which is a
>>> fresh docker image, but failed. No recommendation was made. Maybe state of
>>> your apt repository or something is stale?
>>>
>>> # apt-get install riak-cs=2.0.1-1
>>>
>>> Reading package lists... Done
>>>
>>> Building dependency tree
>>>
>>> Reading state information... Done
>>>
>>> The following NEW packages will be installed:
>>>
>>>   riak-cs
>>>
>>> 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.
>>>
>>> Need to get 20.1 MB of archives.
>>>
>>> After this operation, 36.8 MB of additional disk space will be used.
>>>
>>> Fetched 20.1 MB in 6s (3322 kB/s)
>>>
>>> Selecting previously unselected package riak-cs.
>>>
>>> (Reading database ... 12002 files and directories currently installed.)
>>>
>>> Preparing to unpack .../riak-cs_2.0.1-1_amd64.deb ...
>>>
>>> Unpacking riak-cs (2.0.1-1) ...
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> Setting up riak-cs (2.0.1-1) ...
>>>
>>> Adding group `riak' (GID 105) ...
>>>
>>> Done.
>>>
>>> Adding system user `riakcs' (UID 102) ...
>>>
>>> Adding new user `riakcs' (UID 102) with group `riak' ...
>>>
>>> Not creating home directory `/var/lib/riak-cs'.
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> # apt-get install stanchion=2.0.0-1
>>>
>>> Reading package lists... Done
>>>
>>> Building dependency tree
>>>
>>> Reading state information... Done
>>>
>>> The following NEW packages will be installed:
>>>
>>>   stanchion
>>>
>>> 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.
>>>
>>> Need to get 18.4 MB of archives.
>>>
>>> After this operation, 34.0 MB of additional disk space will be used.
>>>
>>> Fetched 18.4 MB in 5s (3163 kB/s)
>>>
>>> Selecting previously unselected package stanchion.
>>>
>>> (Reading database ... 13780 files and directories currently installed.)
>>>
>>> Preparing to unpack .../stanchion_2.0.0-1_amd64.deb ...
>>>
>>> Unpacking stanchion (2.0.0-1) ...
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> Setting up stanchion (2.0.0-1) ...
>>>
>>> Adding system user `stanchion' (UID 103) ...
>>>
>>> Adding new user `stanchion' (UID 103) with group `riak' ...
>>>
>>> Not creating home directory `/var/lib/stanchion'.
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> #
>>>
>>>
>>>
>>> On Fri, Jun 5, 2015 at 11:40 PM, Matthew Brender <[hidden email]>
>>> wrote:
>>>>
>>>> For others not finding it, the instructions show up here:
>>>>
>>>> https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb
>>>>
>>>>
>>>> Matt Brender | Developer Advocacy Lead
>>>> Basho Technologies
>>>> t: @mjbrender
>>>>
>>>>
>>>> On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:
>>>> > Hi Kota,
>>>> > I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this
>>>> > by
>>>> > following the instructions to add the packagecloud.io Apt repository.
>>>> > However that repository contains stanchion 1.5 rather than 2.0. (It
>>>> > does,
>>>> > however, contain Riak CS 2.0.1)
>>>> >
>>
>>
>> _______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>
>
>
>
> --
> Sincerely,
>
> Christopher Mancini
> -----------------------------
>
> employee = {
>     purpose: solve problems with code,
>     phone:    7164625591,
>     email:     [hidden email],
>     github:    http://www.github.com/christophermancini
> }



--
Kota UENISHI / @kuenishi
Basho Japan KK

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: Bug: Stanchion 1.5 in repo along riak cs 2.0

Toby Corkindale-2
Hey all,
I was just bootstrapping a fresh Riak CS cluster, and to my disappointment ran into the same problem! Stanchion 1.5.0 gets installed, because that's the one you have in the packagecloud repositories.
It's been two years since I reported this issue!

Toby

On Tue, 16 Jun 2015 at 17:41 Toby Corkindale <[hidden email]> wrote:
Glad we got to the bottom of it.
You should probably look at updating your docs for Riak-CS and removing stanchion 1.5 from the repo to avoid future confusion?

On Wed, 10 Jun 2015 at 00:46 Kota Uenishi <[hidden email]> wrote:
I got it! Good catch, Chris.

Toby, you should follow these instructions to get the latest Stanchion:

https://packagecloud.io/basho/stanchion/install

as it looks like we have different repository since 2.0. I did follow
these instructions prior to try my test earlier in this loop.

For Riak CS package, this instructions might be more precise because
it's automatically generated:

https://packagecloud.io/basho/riak-cs/install

On Tue, Jun 9, 2015 at 11:02 PM, Christopher Mancini <[hidden email]> wrote:
> Kota,
>
> I think Toby is right, if you look at packagecloud.io, there is no reference
> to stanchion 2, only 1.5.
>
> https://packagecloud.io/basho/riak-cs?filter=debs
>
> Not sure who can fix this, but its certainly not aligned with our
> recommendations.
>
>
> On Mon, Jun 8, 2015 at 9:04 PM, Toby Corkindale <[hidden email]> wrote:
>>
>> Hi Kota,
>> I was installing these on fresh 14.04 VMs, so I don't know how I could
>> have had stale apt-cache info re Stanchion, but still had up to date riak-cs
>> package info.
>> Oh well, if you couldn't reproduce it, never mind. Thanks for trying.
>>
>> Cheers
>> Toby
>>
>> On Mon, 8 Jun 2015 at 11:54 Kota Uenishi <[hidden email]> wrote:
>>>
>>> Toby,
>>>
>>> I tried to reproduce your problem in my clean ubuntu 14.04 which is a
>>> fresh docker image, but failed. No recommendation was made. Maybe state of
>>> your apt repository or something is stale?
>>>
>>> # apt-get install riak-cs=2.0.1-1
>>>
>>> Reading package lists... Done
>>>
>>> Building dependency tree
>>>
>>> Reading state information... Done
>>>
>>> The following NEW packages will be installed:
>>>
>>>   riak-cs
>>>
>>> 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.
>>>
>>> Need to get 20.1 MB of archives.
>>>
>>> After this operation, 36.8 MB of additional disk space will be used.
>>>
>>> Fetched 20.1 MB in 6s (3322 kB/s)
>>>
>>> Selecting previously unselected package riak-cs.
>>>
>>> (Reading database ... 12002 files and directories currently installed.)
>>>
>>> Preparing to unpack .../riak-cs_2.0.1-1_amd64.deb ...
>>>
>>> Unpacking riak-cs (2.0.1-1) ...
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> Setting up riak-cs (2.0.1-1) ...
>>>
>>> Adding group `riak' (GID 105) ...
>>>
>>> Done.
>>>
>>> Adding system user `riakcs' (UID 102) ...
>>>
>>> Adding new user `riakcs' (UID 102) with group `riak' ...
>>>
>>> Not creating home directory `/var/lib/riak-cs'.
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> # apt-get install stanchion=2.0.0-1
>>>
>>> Reading package lists... Done
>>>
>>> Building dependency tree
>>>
>>> Reading state information... Done
>>>
>>> The following NEW packages will be installed:
>>>
>>>   stanchion
>>>
>>> 0 upgraded, 1 newly installed, 0 to remove and 25 not upgraded.
>>>
>>> Need to get 18.4 MB of archives.
>>>
>>> After this operation, 34.0 MB of additional disk space will be used.
>>>
>>> Fetched 18.4 MB in 5s (3163 kB/s)
>>>
>>> Selecting previously unselected package stanchion.
>>>
>>> (Reading database ... 13780 files and directories currently installed.)
>>>
>>> Preparing to unpack .../stanchion_2.0.0-1_amd64.deb ...
>>>
>>> Unpacking stanchion (2.0.0-1) ...
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> Setting up stanchion (2.0.0-1) ...
>>>
>>> Adding system user `stanchion' (UID 103) ...
>>>
>>> Adding new user `stanchion' (UID 103) with group `riak' ...
>>>
>>> Not creating home directory `/var/lib/stanchion'.
>>>
>>> Processing triggers for ureadahead (0.100.0-16) ...
>>>
>>> #
>>>
>>>
>>>
>>> On Fri, Jun 5, 2015 at 11:40 PM, Matthew Brender <[hidden email]>
>>> wrote:
>>>>
>>>> For others not finding it, the instructions show up here:
>>>>
>>>> https://packagecloud.io/basho/riak-cs/packages/ubuntu/trusty/riak-cs_2.0.0-1_amd64.deb
>>>>
>>>>
>>>> Matt Brender | Developer Advocacy Lead
>>>> Basho Technologies
>>>> t: @mjbrender
>>>>
>>>>
>>>> On Fri, Jun 5, 2015 at 2:11 AM, Toby Corkindale <[hidden email]> wrote:
>>>> > Hi Kota,
>>>> > I'm installing Riak CS upon Ubuntu 14.04 (trusty), and was doing this
>>>> > by
>>>> > following the instructions to add the packagecloud.io Apt repository.
>>>> > However that repository contains stanchion 1.5 rather than 2.0. (It
>>>> > does,
>>>> > however, contain Riak CS 2.0.1)
>>>> >
>>
>>
>> _______________________________________________
>> riak-users mailing list
>> [hidden email]
>> http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
>>
>
>
>
> --
> Sincerely,
>
> Christopher Mancini
> -----------------------------
>
> employee = {
>     purpose: solve problems with code,
>     phone:    7164625591,
>     email:     [hidden email],
>     github:    http://www.github.com/christophermancini
> }



--
Kota UENISHI / @kuenishi
Basho Japan KK

_______________________________________________
riak-users mailing list
[hidden email]
http://lists.basho.com/mailman/listinfo/riak-users_lists.basho.com
Loading...